MeloAuto-Trusted PLC & DCS Parts Supplier
Key Technical Specifications
This GE DS200IMCPG1C DS200IMCPG1CCB board accepts 240V AC single-phase input power. It delivers 15A total output current across six regulated DC rails. The unit measures 28 cm in length, 19 cm in width, and 6 cm in height. Its total weight reaches 1.5 kg without any packaging materials.
The GE DS200IMCPG1C DS200IMCPG1CCB includes six isolated output channels for system distribution. Additionally, it features one input EMI filter for noise suppression. A single 4-pin terminal block connects the AC supply. The board contains 1 transformer, 6 rectifiers, 8 voltage regulators, 14 capacitors, and 22 resistors.
| Parameter | Value |
|---|---|
| Input Voltage | 240V AC ±10%, 50/60Hz |
| Total Output Current | 15A (sum of all rails) |
| Number of Outputs | 6 isolated |
| Output Rails | +5V (3A), +12V (2A), -12V (1A), +15V (2A), -15V (1A), +24V (6A) |
| Dimensions (L x W x H) | 28 cm x 19 cm x 6 cm |
| Weight | 1.5 kg |
| Input EMI Filter | 1 unit (20A rating) |
| Input Fuse | 10A, slow-blow |
| Input Terminal | 4-pin, 20A rated |
| Output Connector | 24-pin header |
| Transformer | 1 unit (toroidal, 400VA) |
| Rectifiers | 6 units (bridge type) |
| Voltage Regulators | 8 units (linear and switching) |
| Capacitors | 14 units (filtering) |
| Resistors | 22 units |
| Energy Storage | 3300 µF at 400V |
GE DS200IMCPG1C DS200IMCPG1CCB stores energy using two large electrolytic capacitors. Together, they provide 3300 µF at 400V rating for input hold-up. This energy storage maintains all outputs during 60 millisecond AC interruptions. Therefore, the board keeps critical controls operational through short power sags.
Design and Integration
Both the GE DS200IMCPG1C and DS200IMCPG1CCB versions share identical power topology. These boards use four-layer PCB construction with heavy copper for high current paths. Consequently, the GE DS200IMCPG1C DS200IMCPG1CCB operates reliably from -20°C to +55°C ambient temperature.
For installation, you need M4 screws for the six mounting holes. The board draws 12A typical input current at full load. Each output includes short-circuit and overvoltage protection. We recommend using 14 AWG wire for the AC input connection.
Practical Application
This printed circuit board converts mains AC voltage into stable DC logic power. It feeds processor boards, I/O modules, and communication interfaces in a drive rack. The GE DS200IMCPG1C DS200IMCPG1CCB also provides power good status for each output rail. Therefore, it serves as the main power source for GE drive and turbine control systems.