MeloAuto-Trusted PLC & DCS Parts Supplier
The GE DS200IMCPG1B DS200IMCPG1BBA Power Supply Interface Board distributes control power to drive system modules. This board receives raw DC input from an external bulk supply. It then conditions and routes power to multiple internal boards. You will find it managing voltage regulation for IGBT gate drivers and logic circuits.
Core Technical Specifications
The GE DS200IMCPG1B DS200IMCPG1BBA Power Supply Interface Board measures 29.0 cm in width and 21.0 cm in height. Its board depth equals 2.5 cm for standard panel mounting. The total assembly weighs approximately 0.62 kilograms. Eight independent power output channels occupy the board’s front section. Each channel provides short-circuit and overcurrent protection.
| Parameter | Specification |
|---|---|
| Input Voltage | 24 VDC ±15% (Single Bulk Supply) |
| Number of Outputs | 8 Independent Power Channels |
| Output Voltage per Channel | 5 VDC, 12 VDC, or 24 VDC (Regulated) |
| Maximum Current per Output | 2 A (Continuous) |
| Total Output Power | 50 W Maximum (All Channels Combined) |
| Efficiency | 88% Typical at Full Load |
| Dimensions (W x H x D) | 29.0 cm x 21.0 cm x 2.5 cm |
| Weight | 0.62 kg (approx) |
Connectors and Voltage Selection Jumpers
The GE DS200IMCPG1B DS200IMCPG1BBA Power Supply Interface Board uses two 20-pin header connectors for output distribution. One 3-position terminal block accepts the main 24 VDC input cable. Eight miniature jumper blocks allow voltage selection per output channel. Set each jumper to 5V, 12V, or 24V according to load requirements. Eight green LEDs confirm proper output voltage on each channel.
Regulation and Protection Features
This power interface board employs switching regulators for high efficiency. The board maintains ±3% voltage regulation across all load conditions. Each output channel includes overcurrent shutdown with automatic retry. Furthermore, the GE DS200IMCPG1B DS200IMCPG1BBA Power Supply Interface Board integrates input reverse polarity protection. This feature prevents damage from accidental wiring errors at installation.
Energy Storage and Thermal Management
This board contains electrolytic filter capacitors on the input and output stages. These capacitors store approximately 5 joules of energy at full voltage. Therefore, the board retains energy for several seconds after power removal. The GE DS200IMCPG1B DS200IMCPG1BBA Power Supply Interface Board requires forced-air cooling in high ambient temperatures. Mount the board vertically to maximize natural convection airflow. Do not exceed 50 W total output power under any condition. Replace the board if any capacitor shows bulging or leakage.