MeloAuto-Trusted PLC & DCS Parts Supplier
Engineered for Fanuc CNC System Power Distribution
This unit supplies regulated DC power to all rack-mounted CNC modules. It provides reliable energy for the GE A16B-1310-0010-01 unit. You will find this power supply in Fanuc Series 15 and 18 control cabinets. Unlike standalone PSUs, this version mounts directly inside the CNC rack. It delivers three separate DC voltages for logic, I/O, and servo interface circuits.
Technical Specifications & Physical Dimensions
We designed this power unit for demanding CNC applications. The table below presents all verified technical specifications.
| Parameter | Specification |
|---|---|
| Physical Dimensions (W x H x D) | 250mm x 180mm x 120mm |
| Total Weight | 3.2 kg (3200 grams) |
| Input Voltage Range | 200-240V AC (single phase) |
| Input Frequency | 50/60 Hz ±5% |
| Output Voltage 1 | 5V DC at 15A |
| Output Voltage 2 | 24V DC at 3A |
| Output Voltage 3 | 48V DC at 2A |
| Total Output Power | 170 Watts maximum |
Functional Architecture and Output Regulation
This power unit connects to the CNC rack via a dedicated backplane connector. It uses a linear regulated design for ultra-low output noise. You can replace the unit without removing other rack modules. Moreover, the unit includes overvoltage and overcurrent protection on all outputs. These components shut down the supply during fault conditions. Consequently, the power unit protects sensitive CNC control circuits from damage.
Installation and Operational Guidelines
The GE A16B-1310-0010-01 achieves 75% efficiency at full load. It requires 100mm clearance on the left side for airflow. You must mount the unit in the designated power supply slot. Always use a dedicated 15 Amp circuit breaker for the input supply. This practice protects the internal input fuse from nuisance blowing. Furthermore, the unit includes a green LED for output OK status. This feature provides immediate visual confirmation of proper operation.
Physical Characteristics and Environmental Limits
This power unit has a rugged, ventilated metal enclosure with rack handles. Its substantial 3.2 kg weight reflects the heavy-duty transformer and heat sink. The layout follows GE Fanuc standard CNC rack specifications. Therefore, it slides securely into any compatible Fanuc main rack. The unit requires one rack slot width for installation. In addition, it maintains stable operation between 0°C and 50°C ambient temperature. You can store this unit safely between -20°C and 70°C.