FUJI NP1L-SL1 Advanced Machine Control

This advanced machine control module provides high-speed logic processing for complex automation tasks. The FUJI NP1L-SL1 executes ladder logic and structured text programs with deterministic scan times. A dedicated 32-bit processor handles all control algorithms without scanning overhead. Consequently, machine builders can achieve precise synchronization for high-speed packaging and assembly lines.

Technical Specifications of the Advanced Machine Control Module

The FUJI NP1L-SL1 measures 113.6 mm in width and 90 mm in height. Its depth reaches 76 mm for standard MICREX-SX rack mounting. The module weighs approximately 0.32 kg including all processing and memory circuitry. A single front panel LED array shows run status, error conditions, and communication activity. The front side features an RS-232 port for programming and debugging. This design stores minimal energy in small decoupling capacitors only. Therefore, the module contains no batteries for program retention.

Parameter	Specification
Brand	Fuji Electric
Full Model	NP1L-SL1
Category	Advanced Machine Control Module
Dimensions (W x H x D)	113.6 mm x 90 mm x 76 mm
Weight	Approximately 0.32 kg
Processor	32-bit RISC
User Program Memory	64 KB (ladder and structured text)
Execution Speed	0.02 µs per basic instruction
Data Memory	16 KB
Timers/Counters	2048 each
Communication Port	RS-232 (programming/HMI)
Energy Storage	Minimal (decoupling only)
Supply Voltage	5V DC from backplane
Backup Method	Flash memory (no battery)

Functional Features and Processing Power

The FUJI NP1L-SL1 executes up to 50,000 steps of user program with 0.02 µs per instruction. You can mix ladder logic and structured text within the same program. The module supports real-time multitasking for independent control loops. Built-in diagnostics report program errors and system faults to the HMI port. Consequently, this advanced controller handles demanding machine control applications with ease.

Installation and System Integration

You must install this control module into a standard MICREX-SX rack slot. The FUJI NP1L-SL1 communicates with I/O modules through the high-speed backplane. An RS-232 cable connects the module to a programming PC or operator panel. The module automatically recognizes all configured I/O racks upon power-up. Always verify program compatibility before replacing an existing control unit.

Maintenance and Operational Benefits

Because the FUJI NP1L-SL1 stores user programs in Flash memory, it needs no battery changes. Technicians can safely remove power without losing the program or data memory. The module retains all logic and configuration parameters indefinitely after programming. Consequently, maintenance becomes simpler and more reliable than older battery-dependent designs.