The KJ4001XI-NB1 dual left cable extender links DeltaV carriers across longer cabinet distances. This unit carries LocalBus signals from two adjacent carriers into one extended run. Engineers specify it for layouts where standard extender modules cannot span the gap.
Physical Dimensions and Weight
The KJ4001X1-NB1 measures 40 mm in width and 130 mm in depth. Its housing stands 105 mm tall, which fits standard DeltaV carrier positions in control cabinets. The unit weighs approximately 0.25 kg, so carrier loading stays balanced during system builds.
Interface and Connectivity
This extender connects to two source carriers through 2 LocalBus inlets on the right edge. The KJ4001X1-NB1 provides 1 combined LocalBus outlet on the left edge for the next segment. Consequently, technicians can merge two carrier chains into one extended path. Four LEDs report power, bus activity, and fault status during operation.
Component Count and Build
Each KJ4001XI-NB1 contains 2 bus buffer circuits, 1 combining logic board, and 1 diagnostic controller. The assembly includes 1 mounting bracket and 2 screws. Furthermore, 1 jumper block sets the bus termination state for the merged chain.
Energy Storage and Power Parameters
The unit draws 5 VDC logic power from the carrier backplane. A 0.022 F capacitor stabilizes the bus driver rail during burst traffic. Therefore, the KJ4001X1-NB1 keeps signal timing consistent through brief supply dips. The design stores no long-term energy and needs no backup battery.
Key Technical Parameters
| Parameter | Specification |
|---|---|
| Width | 40 mm |
| Depth | 130 mm |
| Height | 105 mm |
| Weight | 0.25 kg |
| LocalBus Inlets | 2 |
| LocalBus Outlet | 1 |
| Bus Buffer Circuits | 2 |
| Combining Logic Board | 1 |
| Diagnostic Controller | 1 |
| Jumper Block | 1 |
| Logic Supply | 5 VDC |
| Bus Capacitor | 0.022 F |
| Status LEDs | 4 |
| Mounting Screws | 2 |
Integration Notes
The KJ4001XI-NB1 mounts in standard DeltaV carrier positions without adapters. Technicians set the termination jumper according to the merged chain length before startup. Additionally, the dual buffer circuits keep signal integrity high across both source paths.
MeloAuto-Trusted PLC & DCS Parts Supplier















WeChat
Scan the QR Code with wechat