MeloAuto-Trusted PLC & DCS Parts Supplier
The 10 ED 01 regulates voltage output for ABB industrial control applications. This module provides precise voltage adjustments for field devices and actuators. You can use it for motor speed control or valve positioning tasks.
Key Technical Parameters
The table below lists all essential technical specifications for this voltage control module.
| Specification | Details |
|---|---|
| Part Number | 10 ED 01 |
| Product Type | Voltage Control Module |
| Compatibility | ABB Procontic and legacy systems |
| Number of Outputs | 4 independent voltage outputs |
| Output Voltage Range | 0V to 10V DC (programmable) |
| Output Current | 20 mA per channel (maximum) |
| Resolution | 10 bits |
| Accuracy | ±0.5% of full scale |
| Settling Time | 10 ms typical |
| Load Impedance | ≥ 500 Ω |
| Isolation | Optocoupler (channel to bus) |
| Dimensions (W x H x D) | 100 mm x 70 mm x 30 mm |
| Weight | Approx. 0.18 kg |
| Terminal Type | Screw terminal block |
| Power Supply | 5V DC from backplane + 24V DC external |
| Current Consumption | 120 mA (logic) + 80 mA (field) |
| Operating Temperature | 0°C to 55°C |
Physical Characteristics and Installation
This voltage control module weighs approximately 0.18 kg for compact DIN rail mounting. Its dimensions measure 100 mm x 70 mm x 30 mm for space-saving installation. First, clip the 10 ED 01 onto a standard 35 mm DIN rail. Then, connect your field devices to the screw terminals. Finally, attach the module to the backplane bus connector. LED indicators show power status and output activity per channel.
Output Specifications and Voltage Control
The 10 ED 01 provides 4 independent voltage outputs for flexible regulation. Each channel delivers a programmable range from 0V to 10V DC. The maximum output current reaches 20 mA per channel for typical loads. A 10-bit resolution provides fine voltage adjustments for precise control. The settling time measures only 10 ms for responsive system behavior. Consequently, this module suits closed-loop control applications.
Load Driving and Isolation
This module drives loads with an impedance of at least 500 Ω per channel. Lower impedance loads may require external signal amplifiers. Optocouplers provide isolation between each output channel and the backplane bus. 10 ED 01 requires both 5V DC logic power and 24V DC field power. The accuracy reaches ±0.5% of full scale for reliable process control. Use this module for analog setpoints and actuator commands.