GE IC610MDL129A Input Module for Series One PLCs

The IC610MDL129A captures discrete field signals for GE Series One PLC systems. This module reads status from push buttons, limit switches, and proximity sensors. You can rely on it for machine monitoring and interlock applications.

Key Technical Parameters

The table below lists all essential technical specifications for this input module.

Physical Characteristics and Installation

This input module weighs approximately 0.32 kg for standard rack mounting. Its dimensions measure 160 mm x 90 mm x 50 mm for Series One chassis. First, slide the IC610MDL129A into a free I/O rack position. Then, connect your sensors to the screw terminals. Finally, secure the module using the top and bottom locking tabs. LED indicators on the front show the real-time status of every input channel.

Input Specifications and Signal Detection

The IC610MDL129A provides 8 digital input channels for field connectivity. Each channel accepts 24V DC nominal signals from industrial sensors. The module draws 9 mA per channel for reliable detection. Input impedance measures 2.7 kΩ for proper signal loading. Optocouplers isolate every input from the internal backplane bus. Consequently, this design protects the controller from electrical noise.

Response Time and Power Requirements

This input module delivers a fast 2 ms response time for time-critical applications. Each channel responds within milliseconds to any signal change. The IC610MDL129A draws its operating power from the 5V DC backplane supply. The total current consumption reaches 150 mA under full load. You do not need any external power source for the logic circuits. Use this module for small machine control and monitoring tasks.