ABB 200C-IE8 Analog Module | 8-Channel Input for AC500 PLC

This module converts analog field signals to digital values for the controller. The ABB 200C-IE8 accepts 8 current or voltage inputs for monitoring applications. It measures 45 mm in width and 70 mm in height. This unit weighs approximately 0.11 kg for DIN rail mounting.

Technical Specifications Table

Parameter	Value
Product Model	ABB 200C-IE8
Brand	ABB
Category	Analog Module / Input Expansion
Compatible Series	ABB AC500
Number of Inputs	8 channels
Input Types	Configurable per channel: 0-20 mA, 4-20 mA, 0-10 V
Resolution	12 bits (4095 counts)
Accuracy	±0.2% of full scale at 25°C
Update Rate	12 ms for all 8 channels
Input Impedance	250 Ω (current), 100 kΩ (voltage)
Dimensions (W x H x D)	45 mm x 70 mm x 55 mm
Weight	0.11 kg
Connector Type	1 x 10-pin removable terminal block
Internal Components	1 x 12-bit ADC, 1 x multiplexer
Energy Storage	8 x 0.1 µF input filtering capacitors
Electrical Isolation	500 V AC between inputs and backplane
Overvoltage Protection	±30 V DC continuous
Operating Voltage	5 V DC (from backplane)
Power Consumption	55 mA maximum
LED Indicators	1 x status (Run/Fault)
Operating Temperature	0°C to 60°C

Internal Design and Analog Conversion

This analog module uses a 12-bit ADC for precise signal conversion. A multiplexer scans all eight channels sequentially for processing. The ABB 200C-IE8 configures each channel independently for current or voltage. Eight 0.1 µF capacitors filter high-frequency noise from input signals. Consequently, this module delivers accurate analog readings for process control applications.

Installation and Wiring Guide

First, mount this module onto a standard 35 mm DIN rail securely. Next, wire your analog sensors to the input terminals (channels 1-8). Use shielded twisted-pair cables for all analog signal connections. Configure each channel’s input type using AC500 configuration software. The module provides a green LED for status indication. This analog module works with all AC500 CPU models including 1SAP140200R0160 and 1SAP140300R0160. Always connect the shield drain wire to earth ground for noise reduction.