Schneider TSXETY5103 EtherNet TCP/IP Module

This communication module connects Schneider PLCs to standard Ethernet networks. It enables data exchange between controllers, HMIs, and enterprise systems. You can deploy this unit for factory-wide automation and data collection.

Technical Specifications

Parameter	Value
Model	Schneider TSXETY5103
Category	EtherNet TCP/IP Module
Physical Interface	10/100 Base-T (RJ45, auto-sensing)
Protocol Support	TCP/IP, UDP/IP, Modbus TCP, SNMP
Maximum Connections	64 simultaneous TCP sessions
Data Rate	10 Mbps or 100 Mbps (auto-negotiation)
Cable Type	CAT5e or better, shielded or unshielded
Maximum Cable Length	100 meters per segment
IP Addressing	Static or DHCP (selectable)
Diagnostic LEDs	5 (Link, Activity, Collision, Fault, Power)
Internal Memory	512 KB for configuration and buffers
Power Draw	250 mA from +5 VDC backplane
Dimensions (W x H x D)	4.0 cm × 12.5 cm × 10.5 cm
Weight	0.24 kg (0.53 lbs)
Connector Type	One RJ45 shielded female port
Component Count	1 main board + 1 Ethernet controller chip + 1 RJ45 jack + 5 LEDs
Energy Storage	47 µF logic retention capacitor

Network Connectivity Features

The Schneider TSXETY5103 provides a single 10/100 Base-T Ethernet port. It auto-negotiates speed and duplex settings with your network switch. This module supports both Modbus TCP and general TCP/IP communications. You can connect up to 64 remote devices through simultaneous sessions.

Protocol and Data Exchange

This module handles Modbus TCP requests as both client and server. It also supports SNMP for network management and diagnostics. Moreover, the unit allows email transmission for alarm notifications. You can program data exchanges without additional gateway hardware.

Addressing and Configuration

You can assign an IP address manually through static configuration. Alternatively, the module can obtain an address automatically via DHCP. A built-in web server provides basic configuration and status pages. Consequently, you do not need proprietary software for initial setup.

Installation and Compatibility

Mount this module in any available slot of a TSX Premium PLC rack. The unit draws only 250 mA from the backplane +5 VDC supply. It works with all TSX P57 CPU models running firmware version 4.5 or higher. For best results, use shielded CAT5e cable in industrial environments with high EMI.

Diagnostic and Status Indication

Five LEDs on the front panel provide real-time network status. A green Link LED indicates an active physical connection to your switch. The Activity LED flashes when data packets pass through the module. A separate Fault LED illuminates for IP conflicts or hardware errors.

Energy Storage and Reliability

A 47 µF capacitor maintains configuration memory during brief power cycles. The module retains its IP settings without an external battery backup. You can replace the unit without reloading the configuration data. Therefore, this design minimizes downtime during maintenance procedures.

Why Choose This Module

This Ethernet module upgrades older RS-485 networks to modern IP connectivity. It enables real-time data access from any plant floor PC or MES system. Therefore, manufacturers choose this unit for production monitoring and remote diagnostics.