The 51304808-200 low level analog input board captures weak thermocouple and millivolt signals for TDC 3000 control systems. Process engineers select this board for accurate measurement of low-amplitude sensor outputs. Furthermore, the card fits standard rack slots without backplane changes.
Technical Specifications Overview
| Parameter | Specification |
|---|---|
| Model | 51304808-200 |
| Category | TDC 3000 Low Level Analog Input Board |
| Input Channels | 16 differential low-level inputs |
| Input Signal Range | ±10 mV, ±50 mV, ±100 mV, thermocouple types J/K/T |
| Resolution | 16-bit A/D conversion |
| Accuracy | ±0.05% of full scale |
| Connector Interface | Backplane edge connector, 64-pin, plus terminal block |
| Isolation | 500 V DC field-to-logic isolation |
| Power Consumption | 4.4 W typical |
| Operating Temperature | 0°C to 60°C |
| Dimensions | 185 mm × 105 mm × 24 mm |
| Weight | 0.28 kg |
| Mounting | Rack chassis slot or card guide |
| Component Count | Approximately 145 components |
| Energy Storage | Input filter capacitor bank for 10 ms signal hold |
Low-Level Signal Acquisition and Conversion
Sixteen differential inputs capture thermocouple and millivolt signals with minimal noise pickup. A 16-bit A/D converter resolves tiny voltage changes down to microvolt levels. Consequently, temperature and strain measurements stay accurate across the full operating range. Additionally, the board accepts multiple thermocouple types without external conditioning.
Physical Design and Installation Details
The 185 mm × 105 mm × 24 mm card slides into standard TDC 3000 card guides. Technicians land sensor wiring on a terminal block at the card face. Furthermore, the 0.28 kg weight simplifies handling during routine replacement. Isolation at 500 V DC protects sensitive input circuits from field-side transients.
Reliability Features for Precision Measurement
An input filter capacitor bank holds signal state for 10 ms during brief supply dips. Therefore, short power disturbances do not corrupt measurement data. The 51304808-200 draws only 4.4 W, so cabinet thermal load stays predictable. Finally, about 145 components pass Honeywell screening for dependable long-term service.
MeloAuto-Trusted PLC & DCS Parts Supplier

