The 51304717-100 galvanic isolator module breaks ground loops between Honeywell control electronics and field wiring. Instrument technicians install this module when measurement drift or noise disrupts analog signals. Moreover, the slim housing fits tight cabinet spaces without extra panel cutouts.
Technical Specifications Overview
| Parameter | Specification |
|---|---|
| Model | 51304717-100 |
| Category | Galvanic Isolator Module |
| Isolation Voltage | 1500 V DC galvanic barrier |
| Channels | 2 isolated analog channels |
| Signal Range | 4–20 mA input, 4–20 mA output |
| Accuracy | ±0.05% of full scale |
| Connector Interface | Screw terminals and backplane connector |
| Power Consumption | 3.4 W typical |
| Operating Temperature | 0°C to 60°C |
| Dimensions | 150 mm × 95 mm × 50 mm |
| Weight | 0.38 kg |
| Mounting | DIN rail or panel mount |
| Component Count | Approximately 95 components |
| Energy Storage | Isolation transformer with 12 ms hold-up capacitance |
Isolation Performance and Signal Accuracy
A 1500 V DC galvanic barrier stops ground loops from corrupting low-level analog signals. Consequently, transmitters and controllers exchange data without common-mode interference. Two isolated channels pass 4–20 mA signals with ±0.05% accuracy across the full range. Each channel therefore suits precision flow, pressure, and level measurement loops.
Physical Layout and Installation Details
The 150 mm × 95 mm × 50 mm housing mounts on standard DIN rail or a flat panel. Technicians land field wires on screw terminals with a standard screwdriver. Furthermore, the 0.38 kg weight simplifies positioning inside crowded enclosures. An isolation transformer with hold-up capacitance maintains 12 ms of output during supply dips.
Practical Benefits for Instrument Engineers
Galvanic separation removes noise sources that force repeated calibration visits. Therefore, maintenance teams gain longer intervals between instrument adjustments. The 51304717-100 draws only 3.4 W, so thermal load stays negligible in dense cabinets. Finally, about 95 components pass Honeywell screening for dependable long-term operation.
MeloAuto-Trusted PLC & DCS Parts Supplier