The 51304672-100 analog output board translates controller commands into steady current and voltage signals for field devices. Process engineers rely on this board for smooth valve and damper control. Furthermore, the card fits standard rack slots without any backplane adjustment.
Technical Specifications Overview
| Parameter | Specification |
|---|---|
| Model | 51304672-100 |
| Category | Analog Output Board |
| Output Channels | 4 analog output channels |
| Output Signal Range | 4–20 mA, 0–10 V DC |
| Resolution | 12-bit D/A conversion |
| Accuracy | ±0.1% of full scale |
| Connector Interface | Backplane edge connector, 48-pin, plus terminal block |
| Isolation | 250 V DC field-to-logic isolation |
| Power Consumption | 3.6 W typical |
| Operating Temperature | 0°C to 60°C |
| Dimensions | 170 mm × 100 mm × 22 mm |
| Weight | 0.25 kg |
| Mounting | Rack chassis slot or card guide |
| Component Count | Approximately 115 components |
| Energy Storage | Output hold capacitor bank for 8 ms signal retention |
Output Conversion and Signal Precision
Four output channels drive valve positioners, dampers, and small variable-speed drives. A 12-bit D/A converter delivers setpoints with ±0.1% accuracy across the full range. Consequently, actuators track controller demands without hunting or overshoot. Additionally, the board supports both 4–20 mA and 0–10 V field signals.
Physical Design and Installation Details
The 170 mm × 100 mm × 22 mm card slides into standard rack chassis card guides. Technicians land field wiring on a terminal block at the card face. Furthermore, the 0.25 kg weight keeps handling easy during routine replacement. Isolation at 250 V DC shields logic circuits from field-side transients and ground loops.
Reliability Features for Continuous Control
An output hold capacitor bank maintains signal levels for 8 ms during supply dips. Therefore, short power disturbances do not shift actuator positions. The 51304672-100 draws only 3.6 W, so cabinet thermal load stays predictable. Finally, about 115 components pass Honeywell screening for dependable long-term service.
MeloAuto-Trusted PLC & DCS Parts Supplier


