GE IS200TRTDH1C IS200TRTDH1CCC Input Termination Board

The GE IS200TRTDH1C IS200TRTDH1CCC RTD Input Termination Board connects field RTD sensors to the main control system. You will find this board essential for accurate temperature signal conditioning. Its screw terminal design simplifies field wiring and maintenance significantly.

Dimensions, Weight, and Mechanical Layout

This RTD termination board measures 19.5 cm in length and 14.2 cm in width. Its height reaches 3.5 cm including all terminal blocks. The total weight stands at 0.47 kilograms for DIN-rail mounting. A fiberglass-reinforced PCB provides excellent mechanical strength and insulation.

Input Interfaces and Component Count

The GE IS200TRTDH1C IS200TRTDH1CCC RTD Input Termination Board offers sixteen independent RTD input channels. Each channel accepts 2-wire, 3-wire, or 4-wire PT100 connections. You also receive four common reference terminals for noise reduction. In total, this board contains 156 individual electronic components. These include 16 terminal blocks, 32 surge suppression diodes, and 84 precision resistors.

Energy Storage and Filtering Features

A passive RC filter network provides onboard energy filtering for each channel. This filtering rejects 50/60 Hz noise from industrial environments. The board requires no external power for passive signal conditioning. Peak signal attenuation stays below 0.5 dB at nominal frequencies.

Environmental Limits and Wiring Specifications

Therefore, the operating temperature ranges from -40°C to +70°C. Storage temperatures extend from -55°C to +85°C without degradation. Each screw terminal accepts 16 to 26 AWG solid or stranded wire. Maximum torque specification reaches 0.5 Nm for reliable connections.

Below table summarizes all key technical parameters:

Parameter	Value
Manufacturer	General Electric
Series	Mark VI IS200
Full Product Name	GE IS200TRTDH1C IS200TRTDH1CCC RTD Input Termination Board
Model Numbers	IS200TRTDH1C, IS200TRTDH1CCC
Length	19.5 cm
Width	14.2 cm
Height	3.5 cm
Weight	0.47 kg
PCB Material	Fiberglass-reinforced
Mounting Type	DIN-rail
Independent RTD Channels	16
Supported Sensor Types	PT100 (2/3/4-wire)
Common Reference Terminals	4
Total Components	156
Terminal Blocks	16
Surge Suppression Diodes	32
Precision Resistors	84
Filter Type	Passive RC network
Noise Rejection	50/60 Hz
Power Requirement	None (passive)
Signal Attenuation	<0.5 dB
Operating Temperature	-40°C to +70°C
Storage Temperature	-55°C to +85°C
Wire Gauge Range	16 to 26 AWG
Terminal Torque	0.5 Nm max

Connectors, Cabling, and Additional Features

Two 40-pin ribbon cable headers connect directly to the RTD input board. A single shield terminal accepts earth ground for noise immunity. For similar static trip system temperature termination, see the RMS-TSG-TZ-C model from the same manufacturer. However, this RTD termination board specializes in passive signal conditioning exclusively. Mean time between failures (MTBF) exceeds 250,000 hours due to passive design.