GE IS200MVRPH1A IS200MVRPH1ABB | Power Distribution

Central Power Routing for GE Mark VI Systems

The GE IS200MVRPH1A IS200MVRPH1ABB distributes DC power to multiple rack components. This distribution board belongs to the Mark VI series from General Electric. It receives input from the main power supply module. Therefore, it provides clean and protected power to all downstream cards.

Physical Dimensions and Panel Mounting Details

This power board measures 22 cm in width, 16 cm in height, and 4 cm in depth. The GE IS200MVRPH1A IS200MVRPH1ABB weighs approximately 0.55 kg, which supports stable panel mounting. Its heavy-duty PCB uses thick copper traces for high current capacity. Consequently, you can mount it inside any standard GE control cabinet.

Connector Layout and Component Configuration

The GE IS200MVRPH1A IS200MVRPH1ABB features one 10-pin main input connector for power entry. It also provides eight 4-pin output headers for card distribution. This board contains sixteen transient suppression diodes for overvoltage protection. Additionally, it includes six large filtering capacitors for voltage smoothing.

Technical Parameter	Specification
Full Model Name	GE IS200MVRPH1A IS200MVRPH1ABB
Manufacturer	General Electric (GE)
Series	Mark VI / Speedtronic
Product Category	Power Distribution Board
Weight	0.55 kg (1.21 lbs)
Dimensions (W x H x D)	220 mm x 160 mm x 40 mm
Main Input Connector	1 x 10-pin header
Output Headers	8 x 4-pin
Transient Suppression Diodes	16 units
Filtering Capacitors	6 units (1,000 µF each)
Total Capacitance	6,000 µF
Input Voltage Range	24–48 VDC
Maximum Continuous Current	20 A total
Output Protection	Fused per channel (5 A max)
Operating Temperature	–25°C to +70°C

Energy Storage and Transient Suppression Performance

The GE IS200MVRPH1A IS200MVRPH1ABB stores substantial energy for voltage stabilization. Its six capacitors provide 6,000 µF of total capacitance. This storage absorbs voltage dips from sudden load changes. Furthermore, the suppression diodes clamp spikes at 30 VDC, protecting all connected cards.

Role Within the Mark VI Speedtronic System

You will typically find the GE IS200MVRPH1A IS200MVRPH1ABB mounted near the rack power entry point. It connects directly to the main DC power source. Moreover, this board provides individually fused outputs for each downstream card. Its eight output ports supply power to up to eight separate control modules.

Installation and Wiring Guidelines

Use the GE IS200MVRPH1A IS200MVRPH1ABB as a direct replacement for older MVRP revisions. Always verify the input voltage polarity before connecting any wires. This distribution board requires no software configuration or special tools. Each output channel includes a replaceable fuse for overcurrent protection. Simply secure the board with four mounting screws and connect your power cables to the appropriate headers.