GE IS200JPDLG1A IS200JPDLG1ABC Power Distribution Board

The GE IS200JPDLG1A IS200JPDLG1ABC Power Distribution Board distributes DC power to multiple field devices and modules. You will find this board essential for organized power management in turbine cabinets. Its fused outputs protect downstream circuits from overload conditions.

Dimensions, Weight, and Mechanical Layout

This power distribution board measures 22.0 cm in length and 16.5 cm in width. Its height reaches 4.2 cm including all fuse holders. The total weight stands at 0.85 kilograms for heavy-duty DIN-rail mounting. A flame-retardant UL 94V-0 PCB provides excellent fire safety protection.

Power Output Interfaces and Component Count

The GE IS200JPDLG1A IS200JPDLG1ABC Power Distribution Board offers twenty-four independent fused power outputs. Each output delivers 24V DC at 1.5 amperes maximum continuous current. You also receive two main input terminals for 24V DC supply connection. In total, this board contains 168 individual electronic components. These include 24 fuse holders, 24 LED indicators, and 96 current monitoring resistors.

Fusing and Protection Features

Each output channel includes a 1.5A fast-blow fuse for short-circuit protection. The board also features a master 15A circuit breaker on the main input. Individual LED indicators show fuse status for each output channel. Consequently, you can quickly identify blown fuses without removing the board.

Environmental Limits and Wiring Specifications

Therefore, the operating temperature ranges from -30°C to +65°C. Storage temperatures extend from -40°C to +85°C without degradation. Main input terminals accept 10 to 18 AWG for high-current wiring. Output terminals accept 16 to 24 AWG for field device connections.

Below table summarizes all key technical parameters:

Parameter	Value
Manufacturer	General Electric
Series	Mark VI IS200
Full Product Name	GE IS200JPDLG1A IS200JPDLG1ABC Power Distribution Board
Model Numbers	IS200JPDLG1A, IS200JPDLG1ABC
Length	22.0 cm
Width	16.5 cm
Height	4.2 cm
Weight	0.85 kg
PCB Flammability Rating	UL 94V-0
Mounting Type	Heavy-duty DIN-rail
Fused Power Outputs	24
Output Voltage	24V DC
Output Current Capacity	1.5 A per channel
Main Input Terminals	2
Total Components	168
Fuse Holders	24
LED Indicators	24 (fuse status)
Current Monitoring Resistors	96
Output Fuse Rating	1.5A fast-blow per channel
Master Circuit Breaker	15A on main input
Total Current Capacity	15 A maximum
Main Input Wire Gauge	10 to 18 AWG
Output Wire Gauge	16 to 24 AWG
Operating Temperature	-30°C to +65°C
Storage Temperature	-40°C to +85°C

Connectors, Monitoring, and Additional Features

Two 20-pin ribbon cable headers provide power status signals to the controller. A single ground bus bar offers common earth connection for all outputs. For similar static trip system power distribution, see the RMS-TSG-TZ-C model from the same manufacturer. However, this power distribution board specializes in fused 24V DC distribution exclusively. Mean time between failures (MTBF) exceeds 250,000 hours for passive power components.