GE IS200JPDFG1A IS200JPDFG1ACA Power Distribution Module

The GE IS200JPDFG1A IS200JPDFG1ACA DC Power Distribution Module distributes 24V DC power to field devices and control modules. You will find this module essential for organized power management in turbine cabinets. Its fused outputs protect downstream circuits from overload and short circuits.

Dimensions, Weight, and Mechanical Layout

This DC power distribution module measures 18.5 cm in length and 14.8 cm in width. Its height reaches 4.0 cm including all fuse holders. The total weight stands at 0.72 kilograms for heavy-duty DIN-rail mounting. A flame-retardant UL 94V-0 PCB provides excellent fire safety protection.

Power Output Interfaces and Component Count

The GE IS200JPDFG1A IS200JPDFG1ACA DC Power Distribution Module offers sixteen independent fused power outputs. Each output delivers 24V DC at 1.0 ampere maximum continuous current. You also receive two main input terminals for redundant 24V DC supply connection. In total, this module contains 128 individual electronic components. These include 16 fuse holders, 16 LED indicators, and 64 current monitoring resistors.

Fusing and Protection Features

Each output channel includes a 1.0A fast-blow fuse for short-circuit protection. The board also features reverse polarity protection on the main input. Individual red LEDs indicate blown fuse status for each output channel. Consequently, you can quickly identify faulty circuits without removing the module.

Environmental Limits and Wiring Specifications

Therefore, the operating temperature ranges from -30°C to +65°C. Storage temperatures extend from -40°C to +85°C without degradation. Main input terminals accept 10 to 18 AWG for high-current wiring. Output terminals accept 16 to 24 AWG for field device connections.

Below table summarizes all key technical parameters:

Parameter	Value
Manufacturer	General Electric
Series	Mark VI IS200
Full Product Name	GE IS200JPDFG1A IS200JPDFG1ACA DC Power Distribution Module
Model Numbers	IS200JPDFG1A, IS200JPDFG1ACA
Length	18.5 cm
Width	14.8 cm
Height	4.0 cm
Weight	0.72 kg
PCB Flammability Rating	UL 94V-0
Mounting Type	Heavy-duty DIN-rail
Fused Power Outputs	16
Output Voltage	24V DC
Output Current Capacity	1.0 A per channel
Main Input Terminals	2 (redundant)
Total Components	128
Fuse Holders	16
LED Indicators	16 (blown fuse status)
Current Monitoring Resistors	64
Output Fuse Rating	1.0A fast-blow per channel
Reverse Polarity Protection	Built-in on main input
Total Current Capacity	10 A maximum
Main Input Wire Gauge	10 to 18 AWG
Output Wire Gauge	16 to 24 AWG
Operating Temperature	-30°C to +65°C
Storage Temperature	-40°C to +85°C

Connectors, Monitoring, and Additional Features

Two 20-pin ribbon cable headers provide power status signals to the controller. A single ground bus bar offers common earth connection for all outputs. For similar static trip system power distribution, see the RMS-TSG-TZ-C model from the same manufacturer. However, this DC power module specializes in fused 24V DC distribution exclusively. Mean time between failures (MTBF) exceeds 250,000 hours for passive power components.