GE IS200ICIAH1A IS200ICIAH1AAB Mark VI IS200 I/O Board

The GE IS200ICIAH1A IS200ICIAH1AAB Innovation I/O Board Mark VI IS200 handles analog and digital signal processing for turbine control. You will find this I/O board essential for precise field device communication. Its compact layout fits standard Mark VI IS200 racks easily.

Dimensions, Weight, and Build Quality

This innovation I/O board measures 18.7 cm in length and 12.4 cm in width. Its height stays at 2.2 cm including all soldered components. The total weight reaches 0.52 kilograms for stable mounting. A four-layer PCB construction minimizes electrical noise interference.

Interfaces and Connector Count

The GE IS200ICIAH1A IS200ICIAH1AAB Innovation I/O Board Mark VI IS200 offers 16 analog input channels and 8 digital outputs. You also get two isolated RS-485 ports for serial communication. A single RJ45 Ethernet interface supports 10/100 Mbps industrial protocols. In total, the board includes 187 individual electronic components.

Energy Storage and Power Specifications

A 3.3V supercapacitor provides onboard energy storage for up to 48 hours. This backup retains configuration data during unexpected power outages. The board draws only 6.2 watts from a nominal 24V DC supply. Peak inrush current stays below 3.0 amperes for circuit protection.

Memory, Processing, and Environmental Limits

You get 128 MB of flash memory for firmware and user logic storage. The board also includes 64 MB of DDR3 RAM for real-time data buffering. A 300 MHz ARM Cortex-M4 processor manages all I/O scanning tasks. Consequently, the operating temperature ranges from -30°C to +70°C. Storage temperatures extend from -40°C to +85°C without damage.

Below table summarizes all key technical parameters:

Parameter	Value
Manufacturer	General Electric
Series	Mark VI IS200
Full Product Name	GE IS200ICIAH1A IS200ICIAH1AAB Innovation I/O Board Mark VI IS200
Model Numbers	IS200ICIAH1A, IS200ICIAH1AAB
Length	18.7 cm
Width	12.4 cm
Height	2.2 cm
Weight	0.52 kg
PCB Layers	4
Analog Input Channels	16
Digital Outputs	8
Isolated RS-485 Ports	2
Ethernet Interface	1 (10/100 Mbps)
Total Components	187
Onboard Energy Storage	3.3V supercapacitor, 48-hour backup
Power Consumption	6.2 W at 24V DC
Inrush Current	≤ 3.0 A
Flash Memory	128 MB
DDR3 RAM	64 MB
Processor	300 MHz ARM Cortex-M4
Operating Temperature	-30°C to +70°C
Storage Temperature	-40°C to +85°C

Additional Reliability Features

Two 20-pin ribbon cable headers connect directly to termination boards. A 10-pin JTAG port enables field firmware updates without removal. For similar static trip applications, consider the RMS-TSG-TZ-C model from the same manufacturer. However, this innovation I/O board specializes in high-density I/O processing exclusively. Mean time between failures (MTBF) exceeds 120,000 hours under normal load.