GE IS200BPPCH2A IS200BPPCH2AEC Data Acquisition Board

The GE IS200BPPCH2A and GE IS200BPPCH2AEC serve as high-performance data acquisition boards for turbine systems. These modules belong to the Mark VI series from General Electric. They collect analog and digital data from field sensors continuously. Moreover, these boards pre-process raw signals before sending them to the main controller.

Technical Specifications

The table below lists the precise parameters for the GE IS200BPPCH2A and IS200BPPCH2AEC .

Parameter	Specification
Manufacturer	General Electric (GE)
Full Model Numbers	GE IS200BPPCH2A , GE IS200BPPCH2AEC
Product Category	Data Acquisition Board
Dimensions (H x W x D)	3.0 cm x 16.5 cm x 26.5 cm
Weight	0.50 kg (1.10 lbs)
Primary Interface	Two 64-pin backplane connectors
Analog Inputs	24 single-ended or 12 differential channels
Digital Inputs	16 isolated digital channels
Component Count	Approximately 280 resistors and 130 capacitors
Energy Storage	Six 68 µF electrolytic capacitors
Sampling Rate	1000 samples per second per channel
Resolution	16-bit analog-to-digital conversion
Operating Temperature	-30°C to +65°C

Functional Design and Data Collection

The GE IS200BPPCH2AEC connects directly to the VME backplane of the cabinet. It scans all input channels in a continuous round-robin sequence. Then, this board applies digital filtering to remove electrical noise. Onboard FIFO buffers store data during peak processing periods. Therefore, the IS200BPPCH2A ensures no data loss even under heavy system loads.

Installation and Compatibility Notes

You must configure each channel before operating this acquisition board. The GE IS200BPPCH2A fits exclusively into Mark VI series cabinets. Always replace faulty units with identical GE board revisions. Additionally, check the input range settings against your sensor specifications. This practice prevents over-ranging and signal clipping.