MeloAuto-Trusted PLC & DCS Parts Supplier
The GE DS200SDCIG2A DS200SDCIG2ADA serves as a TC2000 RST analog I/O card for the Mark V series. This board manages analog signal input and output for turbine control loops. You will find this unit in many industrial power generation systems. General Electric designed this card for the Speedtronic turbine control platform. Its robust construction ensures reliable operation in harsh environments.
Technical Specifications
| Parameter | Specification |
|---|---|
| Full Model Number | GE DS200SDCIG2A DS200SDCIG2ADA |
| Category | TC2000 RST Analog I/O Card for Speedtronic Turbine Control |
| Dimensions (W x H) | Approx. 8.8 x 7.0 inches |
| Weight | 0.68 kg (1.50 lbs) |
| Number of Components | 145+ discrete parts including ADC converters and output drivers |
| Energy Storage | 310 Joules (total capacitive discharge) |
| Interface Type | 8x analog input channels + 4x analog output channels + 1x backplane connector |
This board integrates over 145 discrete components onto a multi-layer PCB. Its dimensions measure roughly 8.8 inches wide by 7.0 inches high. The total weight reaches about 0.68 kilograms including the protective bracket. Eight analog input channels bring sensor signals into the conversion stage. Four analog output channels send control voltages to actuators. One backplane connector provides power and data paths to the main rack. The design stores up to 310 joules of capacitive energy for stable analog processing.
Functional Layout and Analog Processing
The GE DS200SDCIG2A DS200SDCIG2ADA processes analog signals with high accuracy and low drift. Each ADC converter transforms incoming voltages into 14-bit digital values. Moreover, the output drivers generate precise control signals for field devices. This variant includes upgraded converters for better resolution and response time. General Electric specifically designed this analog I/O card for the Mark V Speedtronic system. You can replace an older card with this unit without changing the rack configuration.
Installation Guidelines and Compatibility
This analog I/O card mounts directly into a standard Mark V rack slot. Always disconnect system power before handling the GE DS200SDCIG2A DS200SDCIG2ADA. The card works with existing GE Mark V backplanes and analog sensors. Verify your firmware revision supports this variant. This card maintains backward compatibility with earlier Mark V versions. Proper installation ensures accurate analog I/O processing and system integrity.