GE DS200PTBAG1A DS200PTBAG1AEC Protection Module

The GE DS200PTBAG1A and GE DS200PTBAG1AEC serve as dedicated protection termination modules for turbine systems. These modules belong to the Mark V series from General Electric. They provide termination points for critical protection circuits within the cabinet. Consequently, these boards ensure reliable operation of overspeed and over-temperature protection functions.

Technical Specifications

The table below lists the precise parameters for the GE DS200PTBAG1A and DS200PTBAG1AEC .

Parameter	Specification
Manufacturer	General Electric (GE)
Full Model Numbers	GE DS200PTBAG1A , GE DS200PTBAG1AEC
Product Category	Protection Termination Module
Dimensions (H x W x D)	2.5 cm x 15.0 cm x 25.0 cm
Weight	0.40 kg (0.88 lbs)
Primary Interface	One 64-pin backplane connector and terminal blocks
Protection Channels	8 dedicated trip input channels
Component Count	Approximately 150 resistors and 60 capacitors
Energy Storage	Four 47 µF electrolytic capacitors
Terminal Type	Fixed screw-type terminal blocks
Operating Temperature	-30°C to +65°C

Functional Design and Protection Circuitry

The GE DS200PTBAG1AEC connects directly to the protection backplane of the cabinet. It accepts field wiring from overspeed and temperature sensors. Then, this board passes conditioned signals to the trip relay module. Each channel includes a status LED for visual confirmation. Therefore, the DS200PTBAG1A simplifies troubleshooting of protection circuit wiring.

Installation and Compatibility Notes

You must tighten all terminal screws before powering up the system. The GE DS200PTBAG1A fits exclusively into Mark V series cabinets. Always replace faulty units with identical GE board revisions. Additionally, verify the sensor wiring against the terminal labels. This practice prevents false trips due to wiring errors.