MeloAuto-Trusted PLC & DCS Parts Supplier
The FUJI NV1X3204 captures discrete field signals for your control system. This digital input card belongs to the MICREX-F programmable controller family. It reads status from limit switches, push buttons, and proximity sensors. You can use it for machine monitoring and safety interlock applications.
Key Technical Specifications
Below you will find the accurate technical parameters for the FUJI NV1X3204.
| Parameter | Specification |
|---|---|
| Product Type | Digital Input Card |
| Series | MICREX-F |
| Number of Inputs | 16 points |
| Input Type | Sourcing (PNP) |
| Rated Voltage | 24 V DC |
| Input Current | 7 mA per point |
| Response Time | 2 ms (typical) |
| Isolation | Optocoupler (field to logic) |
| Manufacturer | FUJI Electric |
The card measures 90 mm in width and 70 mm in height. Its total depth reaches 55 mm. The FUJI NV1X3204 weighs approximately 190 grams. This unit contains a single PCB with 16 optocoupler input circuits. Energy storage uses small capacitors for input filtering on each channel.
You will find a 20-pin connector on the front panel. Each input channel has a green LED status indicator. Consequently, you can verify field signals instantly without a multimeter. The card also includes reverse polarity protection on the power input.
Installation and System Integration
You can mount the FUJI NV1X3204 directly into a MICREX-F rack. The card draws power from the backplane bus. Therefore, you do not need an external supply for operation. The CPU reads all 16 inputs during each program scan cycle.
WeChat
Scan the QR Code with wechat