FUJI NR1JY-08R07DT | MICREX-F I/O Terminal Module

The FUJI NR1JY-08R07DT combines input and output functions in one unit. This I/O terminal module belongs to the MICREX-F controller family. It connects field devices directly to the PLC backplane. You can use it for compact automation installations with limited space.

Key Technical Specifications

Below you will find the accurate technical parameters for the FUJI NR1JY-08R07DT.

Parameter	Specification
Product Type	I/O Terminal Module
Series	MICREX-F
Digital Inputs	8 points (24 V DC)
Digital Outputs	7 points (relay)
Input Current	7 mA per point
Output Contact Rating	2 A per point (resistive)
Isolation	Optocoupler (inputs) / Relay (outputs)
Manufacturer	FUJI Electric

The module measures 105 mm in width and 85 mm in height. Its total depth reaches 60 mm. The FUJI NR1JY-08R07DT weighs approximately 320 grams. This unit contains one main PCB with input circuits and seven relays. Energy storage uses a small capacitor for input filtering on each channel.

You will find a removable terminal block on the bottom edge. Each input channel has a green LED status indicator. Each output channel has a red LED for visual confirmation. Consequently, you can troubleshoot field wiring without any test equipment.

Installation and System Integration

You can mount the FUJI NR1JY-08R07DT directly into a MICREX-F rack. The module draws power from the backplane bus. Therefore, you do not need separate external supplies for logic. The relay outputs can switch AC or DC loads up to 2 amps.