MeloAuto-Trusted PLC & DCS Parts Supplier
The FUJI NR1JX-1606DT enables high-speed data exchange between devices. This communication module belongs to the MICREX-F PLC family. It connects controllers to field networks and remote I/O stations. You can use it for distributed automation and real-time monitoring systems.
Key Technical Specifications
Below you will find the accurate technical parameters for the FUJI NR1JX-1606DT.
| Parameter | Specification |
|---|---|
| Product Type | Communication Module |
| Series | MICREX-F |
| Interface Type | RS-485 (isolated) |
| Number of Ports | 1 |
| Protocol | Modbus RTU (master/slave) |
| Baud Rate | 1200 to 115.2 kbps |
| Transmission Distance | Up to 1200 meters |
| Node Capacity | 32 devices maximum |
| Manufacturer | FUJI Electric |
The module measures 105 mm in width and 85 mm in height. Its total depth reaches 60 mm. The FUJI NR1JX-1606DT weighs approximately 230 grams. This unit contains a main PCB with a communication processor and isolation circuits. Energy storage uses capacitors for signal buffering during data transmission.
You will find a removable 5-pin terminal block on the front panel. The module supports both two-wire and four-wire network configurations. Consequently, you can build flexible fieldbus topologies easily. LED indicators show power, transmit, receive, and error status clearly.
Installation and System Integration
You can mount the FUJI NR1JX-1606DT directly into a MICREX-F rack. The module draws all necessary power from the backplane bus. Therefore, you do not need an external power supply at all. The CPU exchanges data with this module using dedicated communication instructions.
WeChat
Scan the QR Code with wechat