FUJI NP1L-DS1 | MICREX-F Communication Module

The FUJI NP1L-DS1 enables serial data exchange between automation devices. This communication module belongs to the MICREX-F PLC family. It connects controllers to external peripherals and networks. You can use it for remote monitoring and data logging applications.

Key Technical Specifications

Below you will find the accurate technical parameters for the FUJI NP1L-DS1.

Parameter	Specification
Product Type	Communication Module
Series	MICREX-F
Interface Type	RS-232C (isolated)
Number of Ports	1
Protocol	Dedicated MICREX-F protocol
Baud Rate	300 to 19.2 kbps (selectable)
Transmission Distance	Up to 15 meters
Operating Voltage	5 V DC (from backplane)
Manufacturer	FUJI Electric

The module measures 90 mm in width and 70 mm in height. Its total depth reaches 55 mm. The FUJI NP1L-DS1 weighs approximately 155 grams. This unit contains a single main PCB with a communication processor. Energy storage uses small capacitors for signal buffering during data transmission.

You will find a 9-pin D-sub connector on the front panel. The module supports point-to-point connections with programming devices or HMIs. Consequently, you can upload programs and monitor system status easily. LED indicators show power, transmit, and receive status clearly.

Installation and System Integration

You can mount the FUJI NP1L-DS1 directly into a MICREX-F rack. The module draws all necessary power from the backplane bus. Therefore, you do not need an external power supply at all. The CPU handles data exchange through dedicated communication instructions.