MeloAuto-Trusted PLC & DCS Parts Supplier
The FUJI NP1BS-11 forms the foundation of your PLC assembly. This base board belongs to the MICREX-F controller family. It accommodates multiple I/O and special function modules. You can use it to build a scalable automation platform.
Key Technical Specifications
Below you will find the accurate technical parameters for the FUJI NP1BS-11.
| Parameter | Specification |
|---|---|
| Product Type | Base Board / Backplane |
| Series | MICREX-F |
| Number of Slots | 11 |
| Bus Type | Passive backplane |
| Slot Pitch | 25 mm |
| Operating Voltage | From power supply module |
| Mounting | Screw fixation |
| Cooling | Natural convection |
| Manufacturer | FUJI Electric |
The base board measures 482 mm in width and 210 mm in depth. Its total height reaches 88 mm. The FUJI NP1BS-11 weighs approximately 2.6 kg. This unit contains a passive backplane PCB with eleven module connectors. Energy storage does not apply to this passive component.
You will find mounting holes at both ends of the board. The backplane provides all data and power paths between modules. Consequently, modules communicate without any point-to-point wiring. The board also includes a protective cover over the PCB traces.
Installation and System Integration
You can mount the FUJI NP1BS-11 inside a standard 19-inch cabinet. The first slot typically holds a dedicated power supply module. Therefore, you need a compatible PSU for system operation. The passive design generates no heat, so cooling requirements stay minimal.
WeChat
Scan the QR Code with wechat