FUJI NP1AYH4VG-MR | MICREX-F Analog Output Module

The FUJI NP1AYH4VG-MR converts digital values to continuous control signals. This analog output module belongs to the MICREX-F PLC family. It drives actuators, valves, and variable speed drives. You can use it for precision process control and positioning applications.

Key Technical Specifications

Below you will find the accurate technical parameters for the FUJI NP1AYH4VG-MR.

Parameter	Specification
Product Type	Analog Output Module
Series	MICREX-F
Number of Outputs	4 channels
Output Signal Range	0-10V DC or 4-20mA (selectable)
Resolution	12 bits
Accuracy	±0.5% of full scale
Conversion Time	1 ms per channel
Isolation	Between channels and logic
Manufacturer	FUJI Electric

The module measures 105 mm in width and 85 mm in height. Its total depth reaches 60 mm. The FUJI NP1AYH4VG-MR weighs approximately 260 grams. This unit contains a main PCB with digital-to-analog converters for each channel. Energy storage uses capacitors for output signal smoothing and filtering.

You will find a removable terminal block on the bottom edge. Each output channel has a green LED for active signal indication. Consequently, you can verify output status without external tools. The module also includes short-circuit protection on all channels.

Installation and System Integration

You can mount the FUJI NP1AYH4VG-MR directly into a MICREX-F rack. The module draws power from the backplane bus. Therefore, you do not need a separate external supply. The CPU writes updated analog values each scan cycle.