MeloAuto-Trusted PLC & DCS Parts Supplier
Board Overview
This PLC module connects field devices to higher-level control networks. You can install FUJI CHAABIM02-100 directly into distributed I/O stations. The unit processes digital signals from sensors and actuators locally. It communicates with the main controller through industrial fieldbus protocols.
Technical Specifications
| Parameter | Value |
|---|---|
| Dimensions (W x H x D) | 85 mm x 75 mm x 55 mm |
| Weight | 0.22 kg |
| Digital inputs | 8 points (24V DC, sink type) |
| Digital outputs | 6 points (transistor, 0.3A per point) |
| Communication protocol | Modbus RTU via RS-485 |
| Baud rate | 9600 to 115200 bps (selectable) |
| Status indicators | 14 LEDs (power, run, I/O status) |
| Interface to field devices | Removable screw terminal block |
| Total onboard components | 96 discrete parts |
| Energy storage type | Ceramic and aluminum capacitors |
| Energy storage rating | 100 µF at 16V DC |
| Operating temperature | -10°C to +50°C |
Board Layout and Components
The PCB places input circuits on the left side of the board. Output drivers occupy the right section for heat separation. Moreover, 96 discrete components include optoisolators and transient suppression diodes. Ceramic capacitors filter high-frequency noise on all power rails. Consequently, the module rejects electrical interference from nearby machinery.
Installation Process
You can mount FUJI CHAABIM02-100 on a standard 35 mm DIN rail. The removable terminal block simplifies wiring replacement during maintenance. Furthermore, two RJ-45 ports provide daisy-chain RS-485 connections. DIP switches allow configuration of node address and baud rate easily.
Performance Advantages
This module scans all inputs and updates outputs every 10 milliseconds. The built-in Modbus RTU protocol supports most major PLC brands. Therefore, integration takes minimal engineering time and effort. LED indicators also show communication status and I/O states at a glance.
Safety and Compliance
FUJI CHAABIM02-100 meets CE and RoHS industrial standards. The unit stores negligible electrical energy after power removal. Hence, technicians face no capacitor discharge risks during field servicing.