The 51404127-250 rack chassis houses TDC 3000 I/O boards inside Honeywell process control cabinets. This frame holds plug-in modules in aligned slots for reliable backplane contact. Plant engineers depend on its rigid structure through years of continuous operation.
Slot Capacity and Component Count
The 51404127-250 provides 15 card slots for mixed I/O and controller boards. Each slot carries a 50-pin backplane connector for signal and power distribution. The frame assembly contains 96 discrete parts, including guide rails and mounting brackets. Additionally, 2 cooling fan trays maintain airflow across loaded positions.
Physical Dimensions and Weight
This chassis measures 19.0 inches in width and 12.25 inches in height. Frame depth reaches 14.5 inches, while the empty unit weighs approximately 24 pounds. These dimensions match standard 19-inch rack installations without adapters. Consequently, technicians mount the frame quickly during cabinet upgrades.
Interface, Backplane, and Power Distribution
The backplane routes +5 VDC and ±12 VDC rails to every slot position. The 51404127-250 provides 1500 VAC isolation between power rails and chassis ground. Two terminal strips handle field wiring entry and protective earth bonding. Therefore, the chassis keeps signal paths clean in electrically noisy plant rooms.
Thermal Parameters and Energy Storage
Dual fan trays move 120 CFM of air across populated slots. The chassis operates within 0°C to 50°C ambient temperature ranges. Two bulk capacitors on the backplane store energy for brief supply dips. Meanwhile, airflow sensors trigger alarms when fan speed drops below threshold.
Key Technical Specifications Summary
| Parameter | Specification |
|---|---|
| Card slots | 15 |
| Backplane connectors | 50-pin per slot |
| Component count | 96 discrete parts |
| Chassis dimensions | 19.0 × 12.25 × 14.5 in |
| Weight | 24 lbs (empty) |
| Power rails | +5 VDC, ±12 VDC |
| Isolation rating | 1500 VAC |
| Cooling airflow | 120 CFM |
| Energy storage | 2 bulk capacitors |
Installation and Application Notes
The 51404127-250 mounts directly into 19-inch cabinets with standard hardware. Engineers assign slot positions through the TDC 3000 configuration software. Technicians verify guide rail alignment before inserting each board. As a result, backplane contact improves and service interruptions decline noticeably.
MeloAuto-Trusted PLC & DCS Parts Supplier