GE IC754VSB06MTD Compact HMI

This compact HMI provides a touchscreen interface for GE Fanuc PLC systems. It displays machine status and accepts operator commands through a monochrome display. You can mount this unit directly on machine panels or control cabinets.

Technical Specifications

Parameter	Details
Brand	GE Fanuc
Model	GE IC754VSB06MTD
Category	Compact HMI (QuickPanel View Series)
Dimensions (H x W x D)	135 mm x 190 mm x 48 mm
Weight	0.65 kg
Display Type	Monochrome LCD with LED backlight
Display Size	5.7 inches diagonal
Resolution	320 x 240 pixels (QVGA)
Color Depth	16 shades of gray
Input Method	4-wire resistive analog touchscreen
Number of Touch Points	Single touch
Communication Interfaces	1x RS-232 + 1x RS-422/485 + 1x Ethernet (10/100 Mbps)
Internal Memory	8 MB flash + 16 MB SDRAM
Number of Internal Components	1 LCD + 1 touch panel + 1 CPU + 1 backlight driver + 1 PCB
Power Supply	24 V DC ±20%
Current Draw	250 mA typical
Built-in Energy Storage	1000 µF capacitor for real-time clock backup
Real-Time Clock Drift	±2 minutes per month
Protection Rating	IP65 (front face) / IP20 (rear)
Backlight Life	50,000 hours typical
Operating Temperature	0°C to 50°C
Mounting Method	Panel cutout (124 mm x 169 mm) with clamps

Detailed Feature Overview

This compact terminal features a 5.7-inch monochrome display with LED backlight. The resistive touchscreen works reliably with gloves or styluses. Sixteen shades of gray provide clear contrast for machine graphics.

A 1000 µF capacitor powers the real-time clock during short outages. Consequently, your event logs retain accurate timestamps after power cycles. The 8 MB flash memory stores screen pages and configuration data permanently.

You will find three communication ports on the rear panel. These ports connect to PLCs via serial or Ethernet networks easily. The IP65-rated front face withstands washdowns in food processing environments.

Installation and Programming

GE IC754VSB06MTD mounts into a 124 mm x 169 mm panel cutout. Use Proficy Machine Edition software for screen design and configuration. Secure the terminal with four mounting clamps from the rear side.