MeloAuto-Trusted PLC & DCS Parts Supplier
This operator interface provides a graphical touchscreen for machine monitoring and control. It displays real-time process data and accepts operator commands directly. You can mount this panel on a machine cabinet or an articulated arm. The unit replaces push buttons and indicator lights with a modern HMI screen.
Technical Specifications & Key Parameters
| Parameter | Detail |
|---|---|
| Product Model | GE IC752DSX000-CB |
| Category | DataPanel Operator Interface (HMI) |
| Screen Size | 7.7 inches diagonal |
| Display Type | Monochrome LCD with CCFL backlight |
| Resolution | 640 x 400 pixels |
| Touch Technology | Resistive analog (finger or stylus) |
| Weight | 1.4 kg (3.09 lbs) |
| External Dimensions (W x H x D) | 240 mm x 180 mm x 55 mm |
| Cutout Dimensions | 220 mm x 160 mm |
| Communication Ports | One RS-232, one RS-422, one RS-485 |
| Protocol Support | GE SRTP, Modbus RTU, and SNPX |
| Memory | 1 MB Flash for screen storage, 512 kB RAM |
| Energy Storage | 470 µF capacitor (retains brightness for 10 seconds) |
| Operating Voltage | 24 V DC nominal (18–32 V DC range) |
| Current Draw | 0.4 A at 24 V DC |
| Backlight Lifetime | 25,000 hours typical |
| Status LEDs | Power, communication, fault |
| Enclosure Rating | NEMA 4X (IP65) from front |
Detailed Feature Overview
GE IC752DSX000-CB features a 7.7-inch monochrome LCD with 640 x 400 resolution. This screen displays text, numbers, and simple graphics clearly. The resistive touch layer responds to gloved fingers or stylus pens. A CCFL backlight provides visibility in low-light factory conditions. The backlight lasts 25,000 hours under normal operation.
Three serial communication ports connect to PLCs and other devices. The unit supports GE SRTP, Modbus RTU, and SNPX protocols natively. One megabyte of Flash memory stores up to 250 screens. Consequently, you can build complex navigation menus and alarm pages. A 470 µF capacitor retains brightness settings for 10 seconds during power dips.
Screen Design and Configuration
You can create screens using GE’s DataPanel configuration software. The software runs on standard Windows PCs without special hardware. Drag and drop objects include push buttons, numeric entries, and bar graphs. The panel also supports alarm logging and recipe management. Download new screens via any serial port without opening the enclosure.
Installation and Environmental Limits
Mount the panel in a 220 mm x 160 mm panel cutout. Four mounting clips secure the unit from the front side. The included gasket creates a NEMA 4X seal against water and dust. Operating temperature ranges from 0°C to 50°C reliably. Store the panel between -20°C and 70°C for long-term preservation. Keep humidity below 90% without condensation to prevent damage.