Bently Nevada 164952-01-01 Accelerometer Mounting Kit

The 164952-01-01 accelerometer mounting kit from Bently Nevada secures vibration sensors onto machine housings and bearing caps. Maintenance teams order this kit whenever they need a stable mechanical interface between accelerometer and equipment. Consequently, it preserves measurement accuracy by keeping sensor contact firm under continuous vibration.

Key Technical Specifications

The table below outlines the main physical and electrical parameters of the 164952-01-01 kit.

Parameter	Specification
Product Type	Accelerometer Mounting Kit
Compatibility	Bently Nevada accelerometers and monitoring systems
Kit Dimensions	Approximately 100 mm x 80 mm x 30 mm
Total Weight	Approximately 0.3 kg (0.66 lbs)
Mounting	Threaded stud or adhesive base mounting
Interface	Mechanical sensor mounting surface
Connectors	Threaded studs and mounting adapters
Component Count	Mounting studs, adapters, washers, and protective caps
Energy Storage	Not applicable for this mechanical assembly
Kit Contents	Multiple mounting hardware pieces and installation guide
Operating Temperature	-40 degrees C to 120 degrees C
Storage Temperature	-40 degrees C to 85 degrees C
Humidity	5% to 95% non-condensing

Functional Overview

This kit provides the mechanical parts that hold an accelerometer firmly against the machine surface. Therefore, it prevents sensor movement that would distort vibration readings. The 164952-01-01 also includes adapters that match common stud and base thread sizes. Meanwhile, each component resists corrosion and loosening under sustained machine vibration.

Installation and Handling Notes

Always prepare a clean, flat mounting surface before attaching the 164952-01-01 hardware. In addition, apply the specified torque to every threaded stud. Use a thin layer of coupling compound where the sensor meets the machine. Finally, verify reading stability after installation.