Honeywell Digital Output 32-Point Processor MU-PDOY22
24 Vdc FTA
| Parameter |
Specification |
| FTA Model Numbers |
MU-TDOY22, MU-TDOY62 |
| Output Channels |
32 |
| Output Type |
Open-collector (current sinking) NPN transistors |
| Load Voltage Range |
15-30 Vdc |
| Load Current |
MU-TDOY22: 0.5 A (max) per point, 1.0 A (max) per 2 points, 5 A (max) per 32 points
MU-TDOY62: 0.5 A (max) per point, 1.2 A (max) per 8 points, 5 A (max) per 32 points |
| Isolation |
Galvanic Isolation (photo coupler)
30 Vac, ±42.4 Vdc max. |
| On-State Voltage |
0.5 V (max), load current @ 0.5A |
| Off-State Voltage |
30 Vdc (max) |
| Off-State Leak Current |
0.5 µA (max) |
| Turn-On/Turn-Off Time |
200 ms (max) |
| Surge Withstand Capability |
ANSI/IEEE C37.90.1-1978 |
| Load Fuse Rating |
- MU-TDOY22: 1 fuse per 2 points (compression)
- MU-TDOY62: 1 fuse per 8 points (screw terminal)
- Fuse: 1.6 A 125 V (5.5 x 17.2 MM)
|
120/240 Vac Relay FTA
| Parameter |
Specification |
| FTA Model Numbers |
MU-TDOY23, MU-TDOY63 |
| Output Channels |
32 (16 per FTA) |
| Contact Type |
Gold-clad silver nickel (16 isolated Form A or Form B contacts) |
| Maximum Load Voltage |
250 Vac (RMS)/125 Vdc |
| Maximum Steady State Load Current per Output |
- 3 A at 250 Vac (resistive)
- 3 A at 125 Vac (resistive)
- 3 A at 30 Vdc (resistive)
- 1 A at 48 Vdc (resistive)
- 0.4 A at 125 Vdc (resistive)
|
| Inductive Load Currents |
- 2 A at 250 Vac (inductive = 0.4 power factor)
- 2 A at 125 Vac (inductive = 0.4 power factor)
- 1 A at 30 Vac (inductive L/R = 100 ms)
- 0.3 A at 48 Vac (inductive L/R = 100 ms)
|
| Minimum Load Voltage |
5 Vdc |
| Minimum Load Current |
10 mA |
| Isolation |
1500 Vac rms or ±1500 Vdc |
| Turn-On/Off Time |
10 ms maximum |
| Contact Life (Mechanical) |
10,000,000 operations |
| Repetition Rate (100% Load) |
200,000 operations at 3 A |
| FTA +24 Vdc Current |
12.5 mA per energized relay (coil resistance = 2 KΩ) |
| Surge Absorber for Coil |
120Ω + 0.03 µF per channel |
| Serviceability |
No fuse for FTA |
| Surge Withstand Capability |
ANSI/IEEE C37.90.1-1978 |
| Note |
One FTA supports up to 16 circuits. For 17-32 circuits, two FTAs are required. Use bridge cable MU-KBFT01 or MU-KBFT02 to connect the FTAs. |
Analog Output IOP Comparison
| Function |
IOP Models |
| AO (8 points) |
MC-PAOX03 |
| AO (16 points) |
MU-PAOY22 |
| Specification |
AO (8 points) |
AO (16 points) |
| Number of Channels |
8 |
16 |
| Smallest ORU |
IOP |
IOP |
| Redundancy |
Yes |
Yes |
| Redundancy Method |
Outputs Electrically Isolated via Field Replaceable Relay Switch Module on FTA |
Parallel Outputs — Solid-State Switch in IOPs |
| Redundancy Bias |
Yes |
No |
| Output Condition on IOP Failure |
Configurable |
Unpowered |
| Output Condition on PMM Failure |
Configurable |
Configurable |
| Single Channel Failure Robustness |
High |
Medium |
| External Connection Check |
Yes |
Yes |
| Standby Manual |
Yes |
Yes |
Notes:
- Optimal Replaceable Unit (ORU): The ORU is an item that can be replaced in the field with minimal impact on system operation. The IOP is an example of an ORU.
- Failure Detection Coverage: The redundancy failure detection is equivalent for both models.
- Channel Robustness: The AO8 provides individual power systems and DAC circuits for each output, while the AO16 uses shared power supply and DAC per IOP.
Model Numbers for Digital Output 32-Point Processor (32 Outputs)
| Description |
Uncoated Model Number |
Coated Model Number |
| Digital Output 32 Processor (32 Outputs) |
MU-PDOY22 |
MC-PDOY22 |
Note: MC model numbers indicate conformally coated boards. All I/O processors (IOPs) are available with conformally coated (MC) versions.
Conformally Coated Assembly Model Numbers
Table 6-3: Conformally Coated Assembly Model Numbers
| Model Number |
Non-CE Compliant Part Number |
CE Compliant Part Number |
Description |
| MC-PDOY22 |
N/A |
80363975-150 |
Digital Output (DO) Processor (32 Outputs) |
MeloAuto-Trusted PLC & DCS Parts Supplier
WeChat
Scan the QR Code with wechat